Save Water (and Cash) with the Ultimate Leak-Fixing Guide

 

 Drip drip drip.

Leaky faucets can be annoying, expensive and bad for the environment. It is the EPA’s 10th annual Fix a Leak Week, and we’re taking the opportunity to encourage everyone to ensure that the pesky drip-drip-dripping is out of our lives for good.

What’s the big deal with leaks?

Here are just a few facts from the EPA to get you thinking about the implications of a leaky faucet or toilet:

  1. The average household can leak more than 10,000 gallons of water every year.
  2. A single leaky faucet can waste 3,000 gallons of water per year.
  3. Nationwide, we waste one trillion gallons of water per year. (Psst: that’s the amount of water used by 11 million homes in one year.)
  4. Fixing leaks can save up to 10 percent on water bills. 

How do I know if I have a leak?

There are a few simple ways to identify whether or not you have a leak in your home:

  1. Check your water bill. Is it noticeably higher than other months? If so, has your usage changed drastically? If not, you may have a leak.
  2. Turn off your water and note the gallons used on the water meter. Wait 20 to 30 minutes and compare. If there has been an increase in the water used, it’s safe to assume that there is a leak.

(via giphy)

When is it my job to fix a leak?

Knowing when a leak is your responsibility versus our responsibility is a common question, so don’t feel alone.

Field Supervisor James Watson of Aqua Ohio is here to help clarify. “Aqua is responsible for maintaining and repairing all water-mains, valves and hydrants in the water distribution system, as well as the company-owned portion of residential service connections,” he said.

If you have identified a major leak that you think is our responsibility to fix, make sure to get in contact with us. If the leak doesn’t fall into the categories mentioned by Watson, though, then it is most likely the responsibility of the homeowner. One thing to keep in mind is that homeowners are responsible for maintaining the residential service line and the easement lines that enter their homes.

Otherwise, a general rule of thumb is that if the leak is within your home, it’s your responsibility. Things like boilers, hot water tanks, internal pressure pumps, faucets and toilets are all the responsibility of the property owner. One exception is your water meter—but only if it is housed within the residence. Luckily, fixing most of these leak areas is a fairly simple process.  

How do I find the leak?

Toilets and faucets are the most common places for there to be leaks, so it could be helpful to check them first.

Faucet issues are easy to identify; if you see or hear them dripping, you’ve got a leak. Toilets, on the other hand, are a little bit more difficult. An easy way to check for a leaky toilet is with food dye:

  1. Drop the food dye into the toilet tank.
  2. Wait 15 to 20 minutes.
  3. If the dye has made its way from the tank to the toilet itself, there is a leak.

If you’re really having trouble identifying a leak, check out our step-by-step guide to detecting these issues.

I found the leak, but I don’t know how to fix it.

If your faucet is the problem, it most likely requires you to replace a washer. This process is very simple, and if you’re comfortable with using some fairly basic tools, it won’t be an issue at all. Check out this helpful walkthrough from HowCast:

Toilets are a bit more complicated, so watch this video from Home Repair Tutor for tips on fixing one of the most common toilet leakage issues:

 

Of course, if you are feeling uncomfortable completing any of these tasks, or if you have a leak that you are unsure how to fix on your own, make sure to call your local plumber.

We want everyone to be aware of their water usage and how they can fix leaks. Join us in identifying and fixing a leak this week to cut down on the trillions of gallons of water that we waste every year. 

Share This Post:

Breaking Down the (Dirty) Details on Wastewater Treatment

Between showering, cooking, doing a load of laundry and washing the dishes, we go through a lot of water. In fact, a typical family produces approximately 200 gallons of wastewater each and every day. 

In addition to the municipal wastewater that comes from our homes, restaurants, and commercial businesses, there’s also industrial wastewater from factories. Long story short: there’s a ton of used, dirty water in the world, and it all has to go somewhere.

Because most of that wastewater ultimately ends up back in local rivers or streams, there are a few steps Aqua takes to make sure it is impeccably clean before it gets there.

We spoke with Tom Bruns, president of Aqua Indiana, to learn exactly what those steps are.

Okay, I just flushed the toilet. Now what?

The second you flush (or drain, or pour, or rinse), the used wastewater shoots down a pipe, merges with other people’s sewage and flows off to a treatment plant for some intensive cleaning. 

First up is the screening process. Because solid objects, such as money, jewelry, toys, personal hygiene products and wipes might accidentally make their way into our wastewater, it’s important to first filter out these items so they don’t clog up the treatment system. Note: While some wipes call themselves “flushable,” they cause all sorts of problems in wastewater collection systems, so throw them in the trash instead of flushing.

After the initial screening, it’s time for gravity to do some of the heavy lifting. Cue primary clarification. During clarification, heavier materials (think: toilet paper) sink to the bottom of the tanks, while lighter ones (like the leftover oil and grease from last night’s dinner) float to the top. All of that gunk is then skimmed out. 

Is that it for the gunk?

We’re glad you asked. Because most of that gunk, like feces, bodily fluids and foods, will not settle on its own, microscopic organisms are introduced into the mix to help break down organic material. 

During this process, which we refer to as biological treatment, the microscopic organisms consume the waste (yum!) and transform it into solid particles that are captured through a round of final clarification and removed from the tank once and for all. 

Just because the sludge and gunk is gone, though, does not mean that the water is squeaky clean. In fact, if the water were to re-enter our world at this point, a lot of people would end up very sick. The water must first be disinfected with the help of ultraviolet light, which is beamed onto the water to sterilize and eliminate any remaining disease-causing organisms.

After all that, it’s time to discharge the final product. Most of the treated water is fed back into local rivers or streams. In areas of the country where water supplies are limited, this treated effluent water is often used to irrigate parks or golf courses. How’s that for a little something to think about next time you find yourself admiring the greens on hole nine?

Why do we do all of this, anyway?

Sure, it may seem like a lot of effort to put into something as undesirable as wastewater, but it’s something we have to do, especially if we don’t want to be living in our own filth. More importantly, though, we treat wastewater in order to prevent pollution, protect our health, protect wildlife and, of course, protect our environment.

Now that we’ve covered the ins and outs of the ways in which Aqua treats different types of water, we’re ready to go green and figure out exactly how Aqua stays sustainable and eco-friendly throughout the year. See you back here next month where we’ll celebrate Earth Day and all the ways in which Aqua does its part for the environment.

Share This Post:

Mossy Madness! Our DIY Guide to the Ultimate Marimo Aquarium

It’s February, and, for a lot of us, there isn’t much green to go around. While we still have to wait a few more months for vibrant greens outside to bloom, we have a solution for your mid-winter viridescent cravings.

Last year, around this time, we taught you about DIY terrariums. This year we have something even more unique in store. Marimo moss balls have a cultural significance in countries in the Northern Hemisphere, most notably in Scotland, Iceland, Estonia and Japan. The term “marimo” originates from Japan, combining the prefix “mari” (meaning “ball”) and the suffix “mo” (meaning “water plant”) to give you, quite literally, “water plant ball.”

While this water plant ball is often referred to as a moss ball, it is actually made of algae and grows naturally in ponds and lakes in many northern countries. The balls are now domesticated for consumer use, and they are a great way to fight off winter blues and brighten up your home.

Here is a step-by-step guide to help you set up your own marimo aquarium:

What you’ll need:

  • Clear bowl or container of any size
  • Water
  • Pebbles, rocks, sea glass or decorative items of your choosing
  • Additional aquarium decorations (optional)
  • Marimo (which you can buy on Amazon, Ebay or from individual merchants)

What to do:

  1. Clean your bowl and container and place it on your work area.
  2. Take your choice of assorted gravel and spread evenly on the bottom of the container.
  3. Place your marimo into the container and fill with cool (70 degrees Fahrenheit or lower) water.
  4. Add your decorations, and voilà—your marimo aquarium is complete!

Tips to keep your marimo healthy:

  • If you use tap water to fill up your marimo’s tank, be careful of the chlorine content, as a high level of chlorine could make your marimo sick.
  • Marimo aren’t used to sunlight, so keep them away from the window to avoid burning them.
  • Marimo need their water to be changed every few weeks, so be sure to give them the fresh water they need.

Remember to have fun with your marimo! You can put them in containers of all sizes, from jars that are the size of a necklace, like the above photo, to the size of a standard goldfish bowl. It’s up to you to personalize your marimo’s home.

Let us know how your aquarium turns out! Tag us on Facebook or Twitter with pictures of your very own DIY marimo habitat. 

Share This Post: